|
||
|
24th November 2006, 16:12 | #31 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Hi David
You can recoup some of the cost by selling the old bits on flea bay but don't do as I did sell them then get a car they could have gone in to Have you got the info and select buttons working ok on the new screen? If not I will post a howto with some info Also once info is working holding it down on the tp page puts the BM24 into service mode Last edited by Keith; 24th November 2006 at 16:51.. |
24th November 2006, 16:39 | #32 | |
Regular poster
none Join Date: Nov 2006
Location: none
Posts: 93
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
No idea if info & select working yet.... did not find a need during my setup What do they do ? |
|
24th November 2006, 16:54 | #33 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Info replaces the TP button on the old screen but is mode sensitive so does more select is the same allows scanning fast forward etc
When wifey lets you out again go and have a play |
24th November 2006, 16:57 | #34 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
I would also double check your old TV tuner some later 2005 cars did have the 16:9 option but I am not sure if the menu was ever hidden
|
24th November 2006, 17:09 | #35 | |
Regular poster
none Join Date: Nov 2006
Location: none
Posts: 93
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
On replacing it with the BMW 4:3/16:9 tuner, there was no option on any menu I could find. After fitting the 16:9 monitor the option appeared on the TV tuning menu. It's got 4:3, 16:9 and zoom selections. |
|
25th November 2006, 09:26 | #36 |
Regular poster
none Join Date: Nov 2006
Location: none
Posts: 93
Thanks: 0
Thanked 0 Times in 0 Posts
|
Keith,
Info & Select buttons not working. Is the fix move back to V21 then back to V28 ? |
25th November 2006, 11:53 | #37 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Yep
like this courtesy of Andrew although V21 should also work " I now have a fully working 16:9 display with fully functioning info and select buttons! You need to download and burn a v21 firmware disk http://www.e38.org/nav/v21_1_CloneCD.rar turn on ignition all the way just before she starts, start up the satnav put it in map view, remove map disc and put in recently burnt disc of version 21(i burnt mine at x1using cdclone)when the software had finished before the ok screen i turned on and off the radio(not sure whether this makes a difference or not)for about 3 secs, put my map disc back in whilst the ok screen was still there, when i pushed the button to OK i turned the radio on and off for 3 secs or so(not sure whether this made a difference or not or whether the firmware has the necessary codes already in the software!)and voila push info and you have tp,rds select tp and keep it pressed and you get a radio version number. push select and you get radio sensitivity etc in cd, all the ussual forward back etc and in tape mode dolby b c etc(you get my drift anyway. Then i updated to version 27 with rover splash screen doing the same radio on off bits and it all works, perspective split screen etc. Regards Andrew Mableson." |
|
|