Rover 75 after market stereo problem

[paulcity1975]

After rechecking the cable the green block is blank and 1 cable running from the yellow block the blue block i think runs to the 6 cd changer that was connected if that helps at all.

Thanks

Cheers Stu will ask at halfords if they got a pc99-x39 with the patch lead this afternoon and will let you know how i get on weird that 2 companies both said the x04 version was right and the controls all different oh well will give your version a try cant do any harm lol

Many thanks

http://www.ebay.co.uk/itm/MG-ZS-2001...item35d08ee5f3

Im right in assuming the yellow blue and green block go in the red connector and will still need the patch lead?

Thanks

[Fusilier]

Originally Posted by paulcity1975

Cheers Stu will ask at halfords if they got a pc99-x39 with the patch lead this afternoon and will let you know how i get on weird that 2 companies both said the x04 version was right and the controls all different oh well will give your version a try cant do any harm lol

Many thanks

Paul

Halfords don't do it, you should just search the www and get one from there

this is where I bought all mine from, I did my first ZT and second ZTwith the pc99-x39 and removed the IR sensor which was on the ZT

and then when I replaced the one on the project car I had to use the PC99-X32 as that had the BMW Connectors

http://www.dynamicsounds.co.uk/autol...l-adaptor.html

Hope that you get it sorted

stu

[paulcity1975]

Will i still need the patch lead or does that 1 by pass the need for 1?found 1 on ebay from dynamic sounds which i have been messaging about the lead they told me the x04 was right lol

[Fusilier]

Originally Posted by paulcity1975

Will i still need the patch lead or does that 1 by pass the need for 1?found 1 on ebay from dynamic sounds which i have been messaging about the lead they told me the x04 was right lol

Paul

see post 11

Stu

[paulcity1975]

Cheers Stu thanks for all your help hopefully get it sorted now

Been on to dynamic sounds and they say the pc99-x39 will not work as my green pug does not have any wires in and seen as the pc99-x04 partly worked that the steering controls will not be in 2 places ggrr doing my head in now lol

http://www.the75andztclub.co.uk/foru...ad.php?t=79121

I had the factory fitted symphony pic 2 installed if that will help just getting passed pillar to post ggrr why they make it so difficult just to add the steering controls

[raykay]

Originally Posted by paulcity1975

Attachment 32641

Hi this is the connections in the car the far right connection is the 1 that plugged in to the factory fitted alpine im wondering if 1 of them plgs does the steering controls as the cd multi changer only goes to a single plug?

Paul

That looks like the connectors for the Symphony, the steering wheel control cables are Blue/Purple and Blue/Orange and should be in pins 2 & 3 of the grey power ISO connector.

If it is, the PC99-X04 is the correct Autoleads adapter lead for that system.

[paulcity1975]

Hi Ray thanks for the response ive had 2 x04 fitted to the car and both was all to pot ie

Vol up start track from beginning
vol down worked fine
mode did nothing at all
track skip/previous went through the menus of what mode should do cd/radio/usb

so god knows why it did that if you are correct it being the right 1 getting on my wick now just want to sort it lol

Cheers Paul

[raykay]

You could try a different make, both 'Connects2' and 'IncarTec' have steering wheel adapter systems.

[paulcity1975]

Ive emailed Connects2 supplier http://www.caraudiodirect.co.uk/inst...-stalk-adaptor they said i can try it if it dont work can send it back for a refund so think im going to give it a try see if this will sort it will google the other you have mentioned just in case this 1 dont work

Cheers

[paulcity1975]

http://www.caraudiodirect.co.uk/inst...-stalk-adaptor

Cheers for all your help this 1 worked for my after market stereo