Fbh question - Page 2

Eddy600 · 8th January 2018, 19:39

Glow pin tests around 0.4 so should be all good, just waiting on a new gasket then will refit and see if it all works as is should.

trebor · 8th January 2018, 19:47

Report back on exactly what it does when you get it back together and start with gsm

dinky d · 8th January 2018, 19:56

Quote:

Originally Posted by Eddy600

I have a gsm unit so can start it up with engine off once it's back together to see how its all running,

Will check the ohms tommorow to see what that's like, and the mesh if I recall looked like straggled wires, but will check that tommorow after it's been through the dishwasher.

I seriously do not think that the gauze will be fit for any where but the bin if it has been thru a dishwasher,if you need any parts let me know.

Comfortably Numb · 9th January 2018, 23:05

For the ignorant - fbh? gsm?

anddyy · 9th January 2018, 23:46

Quote:

Originally Posted by Comfortably Numb

For the ignorant - fbh? gsm?

Fbh = Fuel Burning Heater

Gsm means he can send a text message to the heater to turn it on remotely.

Eddy600 · 10th January 2018, 12:28

So new gasket in all back together and on the car, turn it on with gsm and it smoked for the first 5 mins then ran fine until the end of the cycle hopefully it's been cured I'll see how it goes thank you all for your replies.

8th January 2018, 19:47	#12
trebor This is my second home Rover 75 CDTi Connoisseur SE & MG ZT Saloon 190 Join Date: Jun 2007 Location: Coven Posts: 12,529 Thanks: 526 Thanked 1,877 Times in 885 Posts	Report back on exactly what it does when you get it back together and start with gsm __________________ www.midlandsnanomeets.co.uk Robs Car Gallery Coven near Wolverhampton WV9 2000 Cowley Built Rover 75 2.0 V6 Club SE/ Atlantic Blue/ Sandstone/Walnut (daily driver) 2003 Land Rover Freelander 1 TD4 HSE Helsinki Blue/Black Leather (swmbo daily driver)

8th January 2018, 19:39	#11
Eddy600 Loves to post Rover, MG Join Date: Jul 2016 Location: Halifax Posts: 275 Thanks: 19 Thanked 77 Times in 61 Posts	Glow pin tests around 0.4 so should be all good, just waiting on a new gasket then will refit and see if it all works as is should.

9th January 2018, 23:05	#14
Comfortably Numb Posted a thing or two Rover 75 Saloon Join Date: Dec 2017 Location: Penrith Posts: 1,336 Thanks: 165 Thanked 303 Times in 241 Posts	For the ignorant - fbh? gsm?

10th January 2018, 12:28	#16
Eddy600 Loves to post Rover, MG Join Date: Jul 2016 Location: Halifax Posts: 275 Thanks: 19 Thanked 77 Times in 61 Posts	So new gasket in all back together and on the car, turn it on with gsm and it smoked for the first 5 mins then ran fine until the end of the cycle hopefully it's been cured I'll see how it goes thank you all for your replies.