15" Crown alloys - Page 2

trikey · 24th January 2011, 16:23

Quote:

Originally Posted by MangoMan

Sorry to high-jack, but tell me Trikey, what ET, or offset are your wheels? Must be low 30's....

I have never measured them! I will have a look for you later this week..

MangoMan · 24th January 2011, 18:59

Thanks again, sorry to be a pain. It's just that I want to get some wheel spacers, about 10mm. but I will have to get some longer wheel bolts aswell (on my search list, M14x46x1.5 is standard) as there is only about 10mm of thread that goes into the hub. I like a bit of protrusion like your wheels have.

trikey · 25th January 2011, 01:57

Quote:

Originally Posted by MangoMan

Thanks again, sorry to be a pain. It's just that I want to get some wheel spacers, about 10mm. but I will have to get some longer wheel bolts aswell (on my search list, M14x46x1.5 is standard) as there is only about 10mm of thread that goes into the hub. I like a bit of protrusion like your wheels have.

Try these guys for the longer wheel studs and spacers, I have used them many times, always manage to get what I need.

http://www.northeastalloys.co.uk/sem-alloys.htm

MangoMan · 25th January 2011, 06:54

Quote:

Originally Posted by trikey

Try these guys for the longer wheel studs and spacers, I have used them many times, always manage to get what I need.

http://www.northeastalloys.co.uk/sem-alloys.htm

Duly noted........ Thanks.

24th January 2011, 18:59	#12
MangoMan This is my second home Looking.... Join Date: Oct 2010 Location: England Posts: 10,911 Thanks: 862 Thanked 1,111 Times in 868 Posts	Thanks again, sorry to be a pain. It's just that I want to get some wheel spacers, about 10mm. but I will have to get some longer wheel bolts aswell (on my search list, M14x46x1.5 is standard) as there is only about 10mm of thread that goes into the hub. I like a bit of protrusion like your wheels have. __________________ *Regards, Bill - (MangoMan).* (Member 00854) http://i1110.photobucket.com/albums/...d.jpg~original Last edited by MangoMan; 24th January 2011 at 19:03..