heated seats loom

deeks · 29th May 2012, 09:59

Hi,

I have fitted manual leather seats to my 75 and have since found out that they have the connector for heated seats underneath. I have bought the dash plate with the 2 switches in off ebay but need the 2 looms that plug into the switches and also under the seats. Does anyone have them or know where i can get them.. Failing that can they be manually wired?

Deeks

Rabett_Rover · 29th May 2012, 10:46

When I get home I'll have a check as I should have some.

eurorover · 29th May 2012, 11:58

Just follow the wiring diagram simple to make your own

deeks · 30th May 2012, 17:27

Thanks Rabbet,

Did you have any luck?

Deeks

sterling800 · 13th June 2012, 21:17

i have the same problem.

I have 2 mg zt alacantara seats with heateing elements..I thought i was going to be lucky as theres a spare plug in the loom under the seats,but its not the same fitment.

so would be interested in the response to this question.

chris

sterling800 · 2nd July 2012, 17:36

Bump

Bobon · 4th July 2012, 05:37

Quote:

Originally Posted by sterling800

i have the same problem.

I have 2 mg zt alacantara seats with heateing elements..I thought i was going to be lucky as theres a spare plug in the loom under the seats,but its not the same fitment.

so would be interested in the response to this question.

chris

Don't know if you've seen this but you may find it useful
http://forums.mg-rover.org/showthrea...=leather+seats

Robbberd · 4th September 2012, 13:36

Hi , where can i get a wiring diagram for this , I have a set of electric heated seats , they came with switches and plugs but , unfortunately my car has nothing like that no plugs looms or anything?

Or would it be possible to simply swap the runners etc and make them manual ( but still leather

) .
they are from a 75 , Mine is a ZT ??

davor.091 · 4th September 2012, 15:06

I made a wire using a wire from the old computer

29th May 2012, 09:59	#1
deeks Posted a thing or two MG ZT 2.0 DIESEL Join Date: Sep 2010 Location: Barwell Posts: 1,037 Thanks: 12 Thanked 10 Times in 10 Posts	heated seats loom Hi, I have fitted manual leather seats to my 75 and have since found out that they have the connector for heated seats underneath. I have bought the dash plate with the 2 switches in off ebay but need the 2 looms that plug into the switches and also under the seats. Does anyone have them or know where i can get them.. Failing that can they be manually wired? Deeks

13th June 2012, 21:17	#5
sterling800 Avid contributor MG ZT Join Date: Apr 2012 Location: Manchester Posts: 152 Thanks: 1 Thanked 1 Time in 1 Post	i have the same problem. I have 2 mg zt alacantara seats with heateing elements..I thought i was going to be lucky as theres a spare plug in the loom under the seats,but its not the same fitment. so would be interested in the response to this question. chris __________________ 1992 Metro 114GTI 1999 Rover 800 Vitesse 2002 MG ZT 190 2007 Golf Gti

2nd July 2012, 17:36	#6
sterling800 Avid contributor MG ZT Join Date: Apr 2012 Location: Manchester Posts: 152 Thanks: 1 Thanked 1 Time in 1 Post	Bump __________________ 1992 Metro 114GTI 1999 Rover 800 Vitesse 2002 MG ZT 190 2007 Golf Gti

29th May 2012, 10:46	#2
Rabett_Rover This is my second home Rover 75 Join Date: Nov 2006 Location: - Posts: 5,895 Thanks: 0 Thanked 7 Times in 7 Posts	When I get home I'll have a check as I should have some.

29th May 2012, 11:58	#3
eurorover Posted a thing or two MG ZT Join Date: Feb 2008 Location: Swansea Posts: 1,231 Thanks: 0 Thanked 9 Times in 5 Posts	Just follow the wiring diagram simple to make your own

30th May 2012, 17:27	#4
deeks Posted a thing or two MG ZT 2.0 DIESEL Join Date: Sep 2010 Location: Barwell Posts: 1,037 Thanks: 12 Thanked 10 Times in 10 Posts	Thanks Rabbet, Did you have any luck? Deeks

4th September 2012, 13:36	#8
Robbberd Loves to post MG ZT Join Date: Feb 2012 Location: Wrexham Posts: 407 Thanks: 64 Thanked 5 Times in 5 Posts	Hi , where can i get a wiring diagram for this , I have a set of electric heated seats , they came with switches and plugs but , unfortunately my car has nothing like that no plugs looms or anything? Or would it be possible to simply swap the runners etc and make them manual ( but still leather ) . they are from a 75 , Mine is a ZT ??