|
||
|
||
|
![]() |
#1 |
Posted a thing or two
Rover 75 CDT Connoisseur SE Auto Join Date: Feb 2012
Location: Launceston
Posts: 1,567
Thanks: 169
Thanked 166 Times in 134 Posts
|
![]() Good Evening all,
Some of you may remember a month or so back, I had a bit of a quandary about an OEM removable tow bar I had fitted to the back of my 75. I still had the socket holder and MG Rover electrics hidden under the car, but I didn't have the removable swan neck. Well to cut a long story short, with the very kind help of Saltash and Mr Doodles, I managed to locate the missing part and have recently received it in the post. However, what the seller declined to mention was that the key that locks the swan neck into place had snapped off in the lock, and it looks like someone has taken a butchers knife to try and prize it out. I was wondering whether anyone knew of any techniques/methods that would help me try and remove the offending part of the key? Please see attached picture for a better description. As always, any help gratefully appreciated.
__________________
You've just been ROVERtaken |
![]() |
![]() |
![]() |
#2 | |
This is my second home
75 Contemporary SE Mk II 2004 Man. Sal. CDTi 135ps, FBH on red diesel, WinCE6 DD Join Date: May 2010
Location: Leeds
Posts: 17,274
Thanks: 2,160
Thanked 2,061 Times in 1,586 Posts
|
![]() Quote:
I hope you have raised an Ebay dispute?
__________________
Harry How To's and items I offer for free, or just to cover the cost of my expenses... http://www.the75andztclub.co.uk/foru...40#post1764540 Fix a poor handbrake; DIY ABS diagnostic unit; Loan of the spanner needed to change the CDT belts; free OBD diagnostics +MAF; Correct Bosch MAF cheap; DVB-T install in an ex-hi-line system; DD install with a HK amp; FBH servicing. I've taken a vow of poverty. To annoy me, send money. |
|
![]() |
![]() |
![]() |
#3 |
Newbie
03 Rover 75 1.8T Club SE Saloon Join Date: May 2012
Location: Durham
Posts: 24
Thanks: 5
Thanked 0 Times in 0 Posts
|
![]() I have one of the Rover OEM towbars fitted & had a problem with the lock turning. Turned out it is just a round barrel "Loctited" in place I just removed the barrel, cleaned it up & re Loctited in place. You should be able to release with Molegrips, even if you damage the lock you will still be able to use the swan neck
|
![]() |
![]() |
![]() |
|
|