LED Door Puddle Lights with CLUB LOGOS

Radioguy · 22nd September 2013, 03:32

We have received permission from the club administration to reproduce the logos for the LED Door Lights. I have just now set it up for ordering on the www.75andzt.com website
I had already sent it to the factory but have them on a holding pattern awaiting approval from the Club. The Artwork will take about 3 or 4 days

I have set up the Website so that members can order the lights and Just order additional Logos if they want. As these are interchangeable. Or they can even just order the Logo if they already have the lights. or you can order the Door lights just with the Club Logos and No MG R LOgos

MG, Rover MK1 and rover facelift logos are available.
You can Also Order either battery operated or 12 volt. Neither require any drilling . the 12 volt wire to your cars electrical.

This is the club logo that I have, Below , I think it will look exceptional from the Logo Lights

This is the link to the section on our website
http://www.75andzt.com/index.php?rou...ory&path=65_71

Commitments
If we can get at least 50 I can go ahead and get them done !
You can order Just the Logo Insert if you already have the Logo Lights

Baroque Moon 2 Sets (4 Inserts)

Battery operated

12 Volt operated

Mark2000cc · 22nd September 2013, 06:21

That looks superb Sean, well done. And well done green team for oking it!

coolcat · 22nd September 2013, 06:44

Great stuff Sean and well done to all involved for granting permission

thomas 75 connie · 22nd September 2013, 08:13

I was thinking how on earth do they do this?they must cut holes in the door etc but no they just stick on.

That is a really good idea

stevenicks · 22nd September 2013, 14:29

I bought two sets of these (four in total) with the Rover logo and was looking to fit them to my 75 connie. I find I am having a problem where to position and stick them so they are secure and positioned correctly. So they are currently still in the box.
Anyone got any ideas or suggestions the best way to fit these?

Thanks
Steve.

Nev The Bear · 22nd September 2013, 16:30

When fitting the battery puddle lights to a 75 is there a way or an easy way to fit the sensors as well?

zero2 · 22nd September 2013, 16:50

These are on my MASSIVE!!! To do list.

:thumbup:

Mischief · 22nd September 2013, 16:52

I have a battery powered set on my doors rover 75 logo and a wired one in the boot

click the image in my sig for build log pics. May get as et of the club logo ones for my rear doors

Chief

Radioguy · 22nd September 2013, 17:45

Quote:

Originally Posted by Mischief

I have a battery powered set on my doors rover 75 logo and a wired one in the boot

click the image in my sig for build log pics. May get as et of the club logo ones for my rear doors

Chief

hey Chief , Look great !

No one has ordered the Club ones yet :-(

I thought I would be run off my feet ! Or off my keyboard ! LOL

Mischief · 22nd September 2013, 17:51

Quote:

Originally Posted by Radioguy

hey Chief , Look great !

No one has ordered the Club ones yet :-(

I thought I would be run off my feet ! Or off my keyboard ! LOL

Give it time you will have too many orders soon enough

Chief

22nd September 2013, 03:32	#1
Radioguy Banned None Join Date: Feb 2010 Location: Here on the Forum Posts: 5,352 Thanks: 632 Thanked 822 Times in 573 Posts	LED Door Puddle Lights with CLUB LOGOS We have received permission from the club administration to reproduce the logos for the LED Door Lights. I have just now set it up for ordering on the www.75andzt.com website I had already sent it to the factory but have them on a holding pattern awaiting approval from the Club. The Artwork will take about 3 or 4 days I have set up the Website so that members can order the lights and Just order additional Logos if they want. As these are interchangeable. Or they can even just order the Logo if they already have the lights. or you can order the Door lights just with the Club Logos and No MG R LOgos MG, Rover MK1 and rover facelift logos are available. You can Also Order either battery operated or 12 volt. Neither require any drilling . the 12 volt wire to your cars electrical. This is the club logo that I have, Below , I think it will look exceptional from the Logo Lights This is the link to the section on our website http://www.75andzt.com/index.php?rou...ory&path=65_71 Commitments If we can get at least 50 I can go ahead and get them done ! You can order Just the Logo Insert if you already have the Logo Lights Baroque Moon 2 Sets (4 Inserts) Battery operated 12 Volt operated Last edited by Radioguy; 30th September 2013 at 00:59..

22nd September 2013, 06:21	#2
Mark2000cc This is my second home MG ZT CDTI Join Date: Jun 2011 Location: Sutton in ashfield Posts: 6,751 Thanks: 1,017 Thanked 699 Times in 501 Posts	That looks superb Sean, well done. And well done green team for oking it! __________________ http://i1151.photobucket.com/albums/...b595c11ba6.jpgStill going strong!

22nd September 2013, 06:44	#3
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,166 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Great stuff Sean and well done to all involved for granting permission __________________ Jeff.

22nd September 2013, 16:52	#8
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	I have a battery powered set on my doors rover 75 logo and a wired one in the boot click the image in my sig for build log pics. May get as et of the club logo ones for my rear doors Chief __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

22nd September 2013, 08:13	#4
thomas 75 connie This is my second home Rover 75 launch car x2, Rover 800 Vitesse Join Date: Jan 2009 Location: Plymouth Devon Posts: 8,463 Thanks: 1,115 Thanked 1,083 Times in 653 Posts	I was thinking how on earth do they do this?they must cut holes in the door etc but no they just stick on. That is a really good idea

22nd September 2013, 14:29	#5
stevenicks This is my second home MG ZT 180 Auto / Rover 75 2.0 Diesel Join Date: Apr 2013 Location: Brecon. Posts: 7,465 Thanks: 3,297 Thanked 1,666 Times in 1,264 Posts	I bought two sets of these (four in total) with the Rover logo and was looking to fit them to my 75 connie. I find I am having a problem where to position and stick them so they are secure and positioned correctly. So they are currently still in the box. Anyone got any ideas or suggestions the best way to fit these? Thanks Steve.

22nd September 2013, 16:30	#6
Nev The Bear This is my second home Does not matter Join Date: Mar 2013 Location: . Posts: 3,996 Thanks: 2,397 Thanked 1,575 Times in 987 Posts	When fitting the battery puddle lights to a 75 is there a way or an easy way to fit the sensors as well?

22nd September 2013, 16:50	#7
zero2 Posted a thing or two MG ZT 190+ Join Date: Jan 2012 Location: Stoke-On-Trent Posts: 1,391 Thanks: 131 Thanked 99 Times in 92 Posts	These are on my MASSIVE!!! To do list. :thumbup: