Towing Electrics

maidstonedave · 3rd July 2014, 17:52

Evening gents. Got detachable tow bar and single electrics (non OEM) on my Connie but the sensor buzzer goes off any time I select reverse with anything attached. Want to put a switch in boot area to break the circuit when necc. Anyone done this or could tell me the correct wire colour to break and where from ?
Thanks in advance.

raykay · 3rd July 2014, 17:58

Fit the switch in the Brown/Green cable in the parking sensor ECU connector, it is the feed from the reverse light switch.

3rd July 2014, 17:52	#1
maidstonedave Regular poster Rover 75 Connie Diesel Tourer Join Date: Jan 2014 Location: Maidstone Posts: 35 Thanks: 20 Thanked 0 Times in 0 Posts	Towing Electrics Evening gents. Got detachable tow bar and single electrics (non OEM) on my Connie but the sensor buzzer goes off any time I select reverse with anything attached. Want to put a switch in boot area to break the circuit when necc. Anyone done this or could tell me the correct wire colour to break and where from ? Thanks in advance.

3rd July 2014, 17:58	#2
raykay I really should get out more....... Now Other Manufacturer Join Date: Nov 2006 Location: Co. Kerry Posts: 2,786 Thanks: 16 Thanked 310 Times in 283 Posts	Fit the switch in the Brown/Green cable in the parking sensor ECU connector, it is the feed from the reverse light switch.