Jacking Points!

roverbarmy · 16th March 2017, 18:43

Just in case anyone needs a health and safety lesson
Jacking Points
Note the wood under the knees, so you don't injure yourself!

gazcaz · 16th March 2017, 18:49

OMG

LOL

Mickyboy · 16th March 2017, 18:52

That looks a little bit naughty

Sprinter · 16th March 2017, 19:00

Given that the sill has more perforations than a Tetley tea bag, I guess the stick won't be there for long.

planenut · 16th March 2017, 19:43

That's one way to clear the plenums!

Mike Noc · 16th March 2017, 19:44

Bought a back axle for a Cavalier Coupe back in the day - had to remove it from the car and the chap said he wouldn't be there but he'd make sure it was accessible.

When I got there the back end was up in the air resting on an old cooker. It was a bit like the coach in the Italian Job - it rocked at the slightest touch.

Luckily he had loads of old wheels laying around, so I stacked them either side for support.

championdaddy · 16th March 2017, 20:16

My question is........what did he use to get it up that high in the first place ?? LOL

olliesgrandad · 16th March 2017, 20:34

Priceless

keithst24 · 16th March 2017, 21:01

Jesus I normally use 4 x 2 when I do that

Sent from my SM-G935F using Tapatalk

steve-45 · 16th March 2017, 21:30

Well, what do you expect - it looks like a RUSSIAN registration.

16th March 2017, 18:43	#1
roverbarmy This is my second home Roverless + 1.7D Sportage Join Date: Aug 2014 Location: East Norfolk Posts: 7,050 Thanks: 729 Thanked 2,021 Times in 1,449 Posts	Jacking Points! Just in case anyone needs a health and safety lesson Jacking Points Note the wood under the knees, so you don't injure yourself! __________________ Oil in my veins!

16th March 2017, 18:49	#2
gazcaz I really should get out more....... MG ZT Join Date: Nov 2014 Location: Worthing Posts: 2,744 Thanks: 3,944 Thanked 576 Times in 471 Posts	OMG LOL __________________ [SIGPIC][/SIGPIC] MG ZT 2.5 V6 234th of 2,834 Trophy Blue ZT 190 + Saloons Produced 14th of 27 MG ZTs Produced on 27-09-2001

16th March 2017, 18:52	#3
Mickyboy SERVICING AND DEALER DIAGNOSTICS MG ZT CDTI 135 + & MGZT CDTI AUTO 160 & ROVER 75 TOURER CDTI 160 TROPHY YELLOW Join Date: Aug 2013 Location: Hernebay Posts: 4,331 Thanks: 818 Thanked 2,414 Times in 1,141 Posts	That looks a little bit naughty __________________ [SIGPIC][/SIGPIC] T4 Owner Jobs done : new UBP, Spy hole mod, Rear hub(wheel bearing),plenum cleaned and emptied, Inline thermostat fitted,Full service, In car Digital tv/DVD Bluetooth Satnav etc, Replaced UBP, Restored headlights,Fixed airbag connection.replaced HP pump,replaced rear light seals,changed intercooler O rings. Jobs to do: ,replace drivers lock,.[/SIZE]

16th March 2017, 19:00	#4
Sprinter Posted a thing or two Jag S-Type 4.2 V8 Join Date: Apr 2011 Location: Derby Posts: 1,645 Thanks: 271 Thanked 427 Times in 293 Posts	Given that the sill has more perforations than a Tetley tea bag, I guess the stick won't be there for long. __________________ “Time flies like an arrow. Fruit flies like a banana.”

16th March 2017, 21:01	#9
keithst24 This is my second home X Power Grey MGZT 180+ Auto... Bumble & 1.8T Odessey Rover 75 Contemporary SE manual Join Date: Nov 2015 Location: Reigate Posts: 5,375 Thanks: 2,254 Thanked 1,801 Times in 1,403 Posts	Jesus I normally use 4 x 2 when I do that Sent from my SM-G935F using Tapatalk __________________ [SIGPIC][/SIGPIC] Bumble Membership Number 35478 Born Monday, 16th June 2003 @ 14:30:35 This vehicle was the 9,196th ZT to run off the production line, out of 18,894 This vehicle was the 576th ZT 180 + to be made out of 828 This vehicle was the 871st ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs

16th March 2017, 19:43	#5
planenut Regional Secretary Rover 1.8T Tourer Join Date: May 2007 Location: Heathrow Posts: 6,955 Thanks: 1,551 Thanked 2,036 Times in 1,264 Posts	That's one way to clear the plenums!

16th March 2017, 19:44	#6
Mike Noc This is my second home Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009 Location: Hampshire Posts: 11,550 Thanks: 3,470 Thanked 3,119 Times in 2,247 Posts	Bought a back axle for a Cavalier Coupe back in the day - had to remove it from the car and the chap said he wouldn't be there but he'd make sure it was accessible. When I got there the back end was up in the air resting on an old cooker. It was a bit like the coach in the Italian Job - it rocked at the slightest touch. Luckily he had loads of old wheels laying around, so I stacked them either side for support.

16th March 2017, 20:16	#7
championdaddy This is my second home Mg Zt 190 Join Date: Apr 2012 Location: The FIRST Garden City....Letchworth. Posts: 6,778 Thanks: 1,243 Thanked 920 Times in 698 Posts	My question is........what did he use to get it up that high in the first place ?? LOL

16th March 2017, 20:34	#8
olliesgrandad Loves to post mg zt Join Date: Sep 2013 Location: Thetford Posts: 458 Thanks: 415 Thanked 72 Times in 60 Posts	Priceless

16th March 2017, 21:30	#10
steve-45 This is my second home Rover 75 Saloon CDTi Join Date: Oct 2015 Location: Belvedere Posts: 4,076 Thanks: 108 Thanked 1,089 Times in 774 Posts	Well, what do you expect - it looks like a RUSSIAN registration.