|
||
|
23rd May 2020, 10:27 | #1 |
Al
75 CDTI Tourer Auto Join Date: Mar 2009
Location: Studley
Posts: 1,457
Thanks: 1
Thanked 69 Times in 48 Posts
|
Parking Sensors Again
Changed me car August last year, Conny SE CDTi Auto Tourer
Everything was fine till Thursday just gone. Selected reverse and got the long beeeeeeeep. Turned the engine off then turned the ignition on without starting the engine. Selected reverse and checked for the sensors for clicking sound. Couldn't hear anything, no clicking from any of them. Me thinks. All sensors wouldn't fail all at the same time so is it the case of:- 1) One sensor failing stops the others from clicking. OR 2)That junction in the loom failing stopping the sensors clicking. Could members in the know please advise what to check first and in what order to check things in. ANY advice will be gratefully recieved. Al
__________________
ARDVARK |
23rd May 2020, 14:53 | #2 |
I really should get out more.......
Rover 75 connoisseur se v6 auto Join Date: May 2014
Location: Hull
Posts: 2,066
Thanks: 1,842
Thanked 623 Times in 469 Posts
|
You are right re 4 sensors failing all at once- i had the long beep 2 years ago - it was corrosion in the connector that bridges the sensor loom to the parking ECU.
__________________
She came off the Longbridge Line on 20-05-2003 The Silver Machine was the 13th of 160 Rover 75's to come off the production line that day and is the 100th of 527 Starlight Silver Rover 75 2.5 V6 Connoisseur SE Auto saloons listed in the build records produced world wide. |
23rd May 2020, 15:25 | #3 |
Al
75 CDTI Tourer Auto Join Date: Mar 2009
Location: Studley
Posts: 1,457
Thanks: 1
Thanked 69 Times in 48 Posts
|
Where would that be on a tourer?
__________________
ARDVARK |
23rd May 2020, 15:34 | #4 |
I really should get out more.......
Rover 75 connoisseur se v6 auto Join Date: May 2014
Location: Hull
Posts: 2,066
Thanks: 1,842
Thanked 623 Times in 469 Posts
|
The parking ECU is on the RHS behind the trim at the rear of the tourer as you look at it -the bumper has to come off to reveal the connector between the ECU and the 4 sensors .
__________________
She came off the Longbridge Line on 20-05-2003 The Silver Machine was the 13th of 160 Rover 75's to come off the production line that day and is the 100th of 527 Starlight Silver Rover 75 2.5 V6 Connoisseur SE Auto saloons listed in the build records produced world wide. |
23rd May 2020, 15:44 | #5 |
Al
75 CDTI Tourer Auto Join Date: Mar 2009
Location: Studley
Posts: 1,457
Thanks: 1
Thanked 69 Times in 48 Posts
|
Cheers.
__________________
ARDVARK |
24th May 2020, 08:57 | #6 |
I really should get out more.......
Rover 75 connoisseur se v6 auto Join Date: May 2014
Location: Hull
Posts: 2,066
Thanks: 1,842
Thanked 623 Times in 469 Posts
|
And the ECU is white in later cars and black in earlier cars - as you have an 03 would think it will be a white box - 5 inches square.
__________________
She came off the Longbridge Line on 20-05-2003 The Silver Machine was the 13th of 160 Rover 75's to come off the production line that day and is the 100th of 527 Starlight Silver Rover 75 2.5 V6 Connoisseur SE Auto saloons listed in the build records produced world wide. |
24th May 2020, 09:22 | #7 |
Avid contributor
Rover 75 Tourer Join Date: Jul 2013
Location: Hertfordshire
Posts: 133
Thanks: 38
Thanked 76 Times in 13 Posts
|
I had the same issue with mine recently. If you slide under the car you should be able to see the connector between the car and the bumper (its normally clipped to the metal frame). Un-plug the connectors from each other and give them a good clean with some electrical contact cleaner, particularly the connector coming from the car.
This solved my issue for a year or so but it reappeared last week. Being at home I decided to replace the harness cable (YMD001580) on mine (52 tourer). If you find that you have the older wiring loom (YMD112321) I have one here that I ordered in error you would be welcome to. Not a bad job to do and you can also take the opportunity to seal the fixings that allow water into boot. Rob https://drive.google.com/open?id=1N3...HwHFCGgMt_A4Uy - With side carpet removed. Last edited by strand1988; 24th May 2020 at 09:31.. |
24th May 2020, 10:42 | #8 |
This is my second home
rover 75 saloon.Renault Captur 1.5 diesel. Join Date: Mar 2013
Location: rhymney
Posts: 3,661
Thanks: 2,269
Thanked 1,242 Times in 702 Posts
|
I took the easy way out. Had bumper off for painting so put in a set from e-bay.
__________________
- John B signing out Maralyn was born 9th Sept 2004 14.44.48. 103,597 of 112,381 (75s) 3,021 of 4,744 Connie SE 239 of 1.685 Platinum Gold. "Maralyn": Platinum Blonde,Troublesome,Unpredictable. |
24th May 2020, 11:00 | #9 | |
This is my second home
Roverless + 1.7D Sportage Join Date: Aug 2014
Location: East Norfolk
Posts: 7,050
Thanks: 729
Thanked 2,021 Times in 1,449 Posts
|
Quote:
The silver were a good match for my Zircon silver!
__________________
Oil in my veins! Last edited by roverbarmy; 24th May 2020 at 11:02.. |
|
24th May 2020, 11:14 | #10 |
Al
75 CDTI Tourer Auto Join Date: Mar 2009
Location: Studley
Posts: 1,457
Thanks: 1
Thanked 69 Times in 48 Posts
|
Cheers to you ALL.
I'm going to have a look at cleaning that connector without taking the bumper off as suggested. I'll let you all know how I get on. Al
__________________
ARDVARK |
|
|