MG Ztt CDTi Spares for sale

Bean66 · 19th August 2020, 21:04

Hi Everyone

Got lots of spares for sale. My 04 Ztt is not going back on the road as no MOT, which ran out it didn’t fail and some front end damage.

So lots of parts are going to be available.
It’s a Ztt + CDTi 135

So lots of mechanical bits and int trim. Its BRG so has the slightly green door cards etc and 4 good doors and tailgate.

The int is generally in good nick and although the drivers seat is shot the pass and rears are good and mechanically to runs ok, no smoke and the GB and clutch seem ok, alt looks quite new.

Everything will be going and anything that doesn’t will be weighed in as scrap.

So if anyone wants anything just PM me and I’ll get back to you.

Cheers Bean

Eddiebassman · 20th August 2020, 10:46

Hi, is the dash a walnut type? I ask as I’m after the cup holder cover (passenger side)
Thanks

Bean66 · 20th August 2020, 11:30

Hi Eddie and All

Nope sorry, the standard MG technical grey.

Its mainly the big mechanical items of which most is good and big trim bits and body work.

So engine/GB brakes etc 4 nice doors and fittings, the tailgate, door cards etc are great and 3 seats (LOL) as DSeat scrap.

But i'll be stripping stuff out the WE as the place its currently stored wants it gone soonish.

So as i said whatever can't find a home goes to the big scrap yard in the sky.

Cheers Bean

BRG75 · 20th August 2020, 11:42

Hi Bean,

Are you OK to post items, and charge (obviously) please?

If so, if it has an Alpine CD changer, I would be very interested in a connector from the wiring loom, or perhaps a loom itself.

Regards

Mike

AndyN01 · 20th August 2020, 20:14

Hi Bean,

PM sent.

Cheers,

Andy.

Eddiebassman · 20th August 2020, 20:21

I don’t know why I prioritised a trim, but I actually need a couple of rear lights for a 75 tourer. Do you still have these and does anyone know if they’ll fit?

another_clean_sheet · 20th August 2020, 20:33

Quote:

Originally Posted by Eddiebassman

I don’t know why I prioritised a trim, but I actually need a couple of rear lights for a 75 tourer. Do you still have these and does anyone know if they’ll fit?

They will fit. Colour is very slightly different

Geoff130 · 21st August 2020, 17:09

Hi, does it have a fuel burning heater?

Eddiebassman · 21st August 2020, 18:18

Nice one clean sheet, pm sent bean.

Bean66 · 3rd September 2020, 11:04

Hi all

Sorry if anyone posted and i've not replied I've just been checking my PM's.

Looks like not many parts needed which is shame a some good stuff going to the crusher as i simply don't have any space to keep anything.

The engine GB and ancilliaries are in fine fettle as are the doors and seats bar the drivers. But it def needs to go in a week.

Cheers Bean

19th August 2020, 21:04	#1
Bean66 Regular poster MG Ztt Join Date: Jan 2018 Location: Brum Posts: 68 Thanks: 1 Thanked 17 Times in 9 Posts	MG Ztt CDTi Spares for sale Hi Everyone Got lots of spares for sale. My 04 Ztt is not going back on the road as no MOT, which ran out it didn’t fail and some front end damage. So lots of parts are going to be available. It’s a Ztt + CDTi 135 So lots of mechanical bits and int trim. Its BRG so has the slightly green door cards etc and 4 good doors and tailgate. The int is generally in good nick and although the drivers seat is shot the pass and rears are good and mechanically to runs ok, no smoke and the GB and clutch seem ok, alt looks quite new. Everything will be going and anything that doesn’t will be weighed in as scrap. So if anyone wants anything just PM me and I’ll get back to you. Cheers Bean

20th August 2020, 10:46	#2
Eddiebassman Loves to post Rover 75 2.0 cdti tourer connoisseur se Join Date: Jul 2020 Location: Halifax Posts: 432 Thanks: 33 Thanked 25 Times in 23 Posts	Cup holder cover Hi, is the dash a walnut type? I ask as I’m after the cup holder cover (passenger side) Thanks

20th August 2020, 11:30	#3
Bean66 Regular poster MG Ztt Join Date: Jan 2018 Location: Brum Posts: 68 Thanks: 1 Thanked 17 Times in 9 Posts	Ztt parts for sale Hi Eddie and All Nope sorry, the standard MG technical grey. Its mainly the big mechanical items of which most is good and big trim bits and body work. So engine/GB brakes etc 4 nice doors and fittings, the tailgate, door cards etc are great and 3 seats (LOL) as DSeat scrap. But i'll be stripping stuff out the WE as the place its currently stored wants it gone soonish. So as i said whatever can't find a home goes to the big scrap yard in the sky. Cheers Bean

20th August 2020, 11:42	#4
BRG75 Gets stuck in Rover 75 Saloon & Tourer, 9th & 10th Rovers Join Date: Nov 2013 Location: Sevenoaks Posts: 976 Thanks: 670 Thanked 290 Times in 195 Posts	Hi Bean, Are you OK to post items, and charge (obviously) please? If so, if it has an Alpine CD changer, I would be very interested in a connector from the wiring loom, or perhaps a loom itself. Regards Mike __________________ Presently 2004 75 CDTi auto Connoisseur Tourer - White Gold 2001 75 2.5 auto Connoisseur Saloon - White Gold Previously 2002 75 1.8 auto Club SE, 2000 75 1.8 auto Classic SE (Company Car) 1997 420 (Company Car) 1996 216 cabriolet, 198? 213 VDP 1986 SD1 V8 VDP, 1968 2000TC, 1966 2000.

20th August 2020, 20:14	#5
AndyN01 This is my second home Toyota RAV4 Join Date: Jun 2017 Location: Tamworth Posts: 3,076 Thanks: 2,478 Thanked 1,579 Times in 968 Posts	Hi Bean, PM sent. Cheers, Andy. Last edited by AndyN01; 20th August 2020 at 20:18..

20th August 2020, 20:21	#6
Eddiebassman Loves to post Rover 75 2.0 cdti tourer connoisseur se Join Date: Jul 2020 Location: Halifax Posts: 432 Thanks: 33 Thanked 25 Times in 23 Posts	Rear lights I don’t know why I prioritised a trim, but I actually need a couple of rear lights for a 75 tourer. Do you still have these and does anyone know if they’ll fit?

21st August 2020, 17:09	#8
Geoff130 Loves to post MG ZT 190, Rover 75 CDTi, Honda VFR 750, Honda CB550F Join Date: Aug 2010 Location: Derby Posts: 393 Thanks: 75 Thanked 36 Times in 28 Posts	Hi, does it have a fuel burning heater?

21st August 2020, 18:18	#9
Eddiebassman Loves to post Rover 75 2.0 cdti tourer connoisseur se Join Date: Jul 2020 Location: Halifax Posts: 432 Thanks: 33 Thanked 25 Times in 23 Posts	Nice one clean sheet, pm sent bean.

3rd September 2020, 11:04	#10
Bean66 Regular poster MG Ztt Join Date: Jan 2018 Location: Brum Posts: 68 Thanks: 1 Thanked 17 Times in 9 Posts	Hi all Sorry if anyone posted and i've not replied I've just been checking my PM's. Looks like not many parts needed which is shame a some good stuff going to the crusher as i simply don't have any space to keep anything. The engine GB and ancilliaries are in fine fettle as are the doors and seats bar the drivers. But it def needs to go in a week. Cheers Bean