|
||
|
25th August 2022, 19:44 | #1 |
Loves to post
Rover 75 Tourer Join Date: Dec 2007
Location: Ammanford
Posts: 496
Thanks: 248
Thanked 29 Times in 24 Posts
|
rover 75 parking aid
hi to all
the parking aid has stopped working it just does one long peeb for say 10 seconds then stops t4 says that 2 sensors are faulty so i bought 4 new sensors fitted the sensors still the same fault now my question is do the new sensors have to be setup using t4 now i have a mg ztt and the parking aid is working so i fitted the new sensors to the mg ztt and nothing that is why i ask if the sensors have to be setup using t4 david |
25th August 2022, 20:30 | #2 |
Loves to post
55 cdti tourer slush box executive grill Join Date: Feb 2022
Location: Sheffield
Posts: 391
Thanks: 40
Thanked 85 Times in 72 Posts
|
Try fitting the mg sensors to the 75 and see if they work, then you know the problem is with the new sensors or the car
Had 2 sensors go down on my tourer just fitted 2 sensors and all was good, didn't need T4 to set them up Last edited by Popcorn; 25th August 2022 at 20:33.. |
26th August 2022, 20:21 | #3 |
Loves to post
Rover 75 Tourer Join Date: Dec 2007
Location: Ammanford
Posts: 496
Thanks: 248
Thanked 29 Times in 24 Posts
|
hi to all
found the fault there was a borken wire on the YMV000200 loom soldered the wire and it is now working tried it on my 75 and it worked also tried it on the mgztt and it worked tried the new sensors no go so i will have to send them back and get replacements david |
|
|