The 75 and ZT Owners Club Forums - View Single Post

Rick-sta · 19th March 2020, 12:20

the new heated windscreen has been fitted this week. Just got to wire it up now.

Done a small modification to the MG7 tail lights to improve the clarity of the indicators by swapping the location of the indicators with the reverse lights. See my post here: https://the75andztclub.co.uk/forum/s...d.php?t=303638

Also been sorting the rear bumper pods over the last couple weeks to finish off the side skirts. These pods were originally on my typhoon ZT but one was damaged when a prat crashed into the back of it a couple years ago.

So started off with flattening these back and repairing any damage. Took a bit of sanding to try and get these to fit as flush as possible. These are moto build fibreglass ones which are a absolutely terrible fit off the shelf.

Then primered, flattened back again to smooth then all down and then base coat applied and lacquered. Then flattened back and polished

All fitted yesterday along with the rear diffuser.

19th March 2020, 12:20	#24
Rick-sta This is my second home MG ZT 2.0 CDTI+ in Typhoon, MG TF 135 in Typhoon & Rover 75 Connoisseur CDTI SE in Pearl Black Join Date: Oct 2012 Location: Norfolk Posts: 7,534 Thanks: 2,718 Thanked 2,827 Times in 1,462 Posts	More work done on Redfive the new heated windscreen has been fitted this week. Just got to wire it up now. Done a small modification to the MG7 tail lights to improve the clarity of the indicators by swapping the location of the indicators with the reverse lights. See my post here: https://the75andztclub.co.uk/forum/s...d.php?t=303638 Also been sorting the rear bumper pods over the last couple weeks to finish off the side skirts. These pods were originally on my typhoon ZT but one was damaged when a prat crashed into the back of it a couple years ago. So started off with flattening these back and repairing any damage. Took a bit of sanding to try and get these to fit as flush as possible. These are moto build fibreglass ones which are a absolutely terrible fit off the shelf. Then primered, flattened back again to smooth then all down and then base coat applied and lacquered. Then flattened back and polished All fitted yesterday along with the rear diffuser. __________________ How to retrofit Cruise Control on a diesel with no OEM wiring in place: Link How to retrofit heated electric memory seats with no OEM wiring in place: Link How to operate FBH and ATC via text Link How to restore cloudy projector headlights Link Last edited by Rick-sta; 28th January 2021 at 16:47..