The 75 and ZT Owners Club Forums - View Single Post - How to retrofit/ make your own loom for heated electric seats

Rick-sta · 30th April 2020, 09:54

As far as I know as long as you have everything wired up correctly and most importantly the k-bus wire (red/white with yellow stripes) wired to the k-bus circuit then the memory seat function with the key should work (if you have a mki without the remote boot release the mkii's have) once you have the option enabled on a t4. Toaf can do this as well if you have it.

30th April 2020, 09:54	#58
Rick-sta This is my second home MG ZT 2.0 CDTI+ in Typhoon, MG TF 135 in Typhoon & Rover 75 Connoisseur CDTI SE in Pearl Black Join Date: Oct 2012 Location: Norfolk Posts: 7,534 Thanks: 2,718 Thanked 2,827 Times in 1,462 Posts	As far as I know as long as you have everything wired up correctly and most importantly the k-bus wire (red/white with yellow stripes) wired to the k-bus circuit then the memory seat function with the key should work (if you have a mki without the remote boot release the mkii's have) once you have the option enabled on a t4. Toaf can do this as well if you have it. __________________ How to retrofit Cruise Control on a diesel with no OEM wiring in place: Link How to retrofit heated electric memory seats with no OEM wiring in place: Link How to operate FBH and ATC via text Link How to restore cloudy projector headlights Link