Led kick trims batch no#3 : Christmas batch deadline friday 16th november

Rick-sta · 4th November 2018, 17:32

LED DOOR KICK TRIMS FOR ROVER 25/ MG ZR, ROVER 45/ MG ZS, ROVER 75/ MG ZT and MGF/MG TF CHRISTMAS BATCH ORDER!!!

ORDER PAYMENT DEADLINE FRIDAY 16TH NOVEMBER!!!!

£90 A SET CHRISTMAS SPECIAL PRICE (USUALLY £100 A SET)

It's time to run the 3rd batch order for the LED kick trims which have proven to be very popular so far

Please read FULL post for details on price, colour options and also how to order and the order process in regards to the order cut off and when these will be manufactured.

The LED kick trims are finished in stainless steel effect so they are very shiny and look much better than the old factory trims even when switched off. When switched on, the LED back lighting shines through the design on the plates and also around the edges.

The trims come with a very strong 3m adhesive tape on the back so they are very quick and easy to fit in place, simply remove the old factory trims and then stick the new ones in place.

These trims are also waterproof as well, so no worry about water getting in and damaging the LEDs.

The set up for these kick trims is so that they turn on when you unlock the car or open a car door, by taking a feed from the courtesy light circuit.

The trims come with the wiring kit; I will also be offering a fitting service in Essex for those who'd like me to fit them for you

DESIGN OPTIONS:

Within the attached photos, I have included design options I've come up with for the various MG Rover models on offer to give you an idea of what you could go for design wise. The manufacturer is fairly flexible when it comes to the design, so if anyone wishes to come up with their own design let me know and I can check with the manufacturer if it is doable. The design has to go on the bottom half of the trims, due to the arrangement of the LEDs under the trims.

Personally I find simple is better, so I would personally advise not to go over complicated with the design or over do it as they look much better lit up when the design is more plain and simple like on the set I've had made for myself.

COLOUR OPTIONS:

These are the LED colour options available:
- WHITE
- BLUE
- GREEN
- RED
- PURPLE
- YELLOW
- PINK

PERMANENT ON VS SEQUENTIAL PATTERN LIGHTING:

Now there are 2 set up options for the lighting, the LEDs can either be set up to just turn on and stay on, or the second option is the LEDs can be set up to run through a sequential pattern. To see what I mean about the sequential pattern option, see this video on youtube for a demonstration of the sequential kick trims fitted to my ZT:
https://www.youtube.com/watch?v=Yj46iJ89yqw.

The sequential pattern option is where the LEDS turn on, and then run through some patterns now and again such as the LEDs turning on from left to right along the kick trim and then from right to left, and also turning on and off in a soft glow pattern.

PLEASE NOTE THE SEQUENTIAL PATTERN IS ONLY AVAILABLE IN BLUE, RED or WHITE.

The permanent on option is available in BLUE, RED, WHITE, YELLOW, GREEN and PINK.

PRICE:

The price for these kits is £90 + £12.50 postage in the UK with the wiring kit and fitting instructions.

For the various models you receive:
- Rover 25/MG ZR 3 door model: 2 x long length LED kick trims
- Rover 25/MG ZR 5 door model: 4 x LED kick trims
- Rover 45/MG ZS: 4 x LED kick trims
- Rover 75/MG ZT (saloons and tourers): 4 x LED kick trims
- MGF/TF: 2 x large LED kick trims

To secure your order, I will require a deposit of £90 (postage can be paid once the trims have been produced and are here) and I will need to know the following:

1. what car model you require the trims for
2. your choice of design option
3. your choice of LED colour
4. if you'd like the Permanent or Sequential LED option

Once we have a total number of orders, they will be sent to the manufacturer as a complete order (payment for postage can be sorted later once the trims have arrived with me). Once I've placed the order with the manufacturer, depending on how many we order, the manufacturer process can take between 1-2 weeks, and once shipped will take around 1-2 weeks to arrive here with me, where I can then send them all on individually to everyone who's ordered them

THE CUT OFF DEADLINE FOR ORDERING IS FRIDAY 16TH NOVEMBER AS THIS IS THE DATE I WILL SEND THE COMPLETE ORDER TO THE MANUFACTURER TO BE PRODUCED.

I will be offering a fitting service for these trims for £30 in Thurrock, Essex.

So if you'd like a set let me know with what design and what colour you'd like to go for, and whether you'd like the LEDs to stay on or if you'd like to go for the sequential pattern option (only available in White, Blue or Red). Remember I can do custom designs for you if you wish.

Design options:

Rover 75/MG ZT

Rover 45/MG ZS

Rover 25/MG ZR (3 door)

Rover 25/MG ZR (5 door)

MGF/TF

Rick-sta · 16th November 2018, 10:03

Reminder that the deadline for ordering the LED kick trims is today

The next batch order most likely won't be until March next year

Proud owner · 9th December 2018, 21:22

Hi Rick, please add me to the list for some when you next order.

Rick-sta · 15th December 2018, 13:13

Quote:

Originally Posted by Proud owner

Hi Rick, please add me to the list for some when you next order.

Hi Jim,

Due to popular demand I've had to bring the next batch order forward, so the current batch order (batch #4) is open now until the deadline of 31st December

See here for ordering:https://the75andztclub.co.uk/forum/s...75#post2694675

Cheers

4th November 2018, 17:32	#1
Rick-sta This is my second home MG ZT 2.0 CDTI+ in Typhoon, MG TF 135 in Typhoon & Rover 75 Connoisseur CDTI SE in Pearl Black Join Date: Oct 2012 Location: Norfolk Posts: 7,534 Thanks: 2,718 Thanked 2,827 Times in 1,462 Posts	Led kick trims batch no#3 : Christmas batch deadline friday 16th november LED DOOR KICK TRIMS FOR ROVER 25/ MG ZR, ROVER 45/ MG ZS, ROVER 75/ MG ZT and MGF/MG TF CHRISTMAS BATCH ORDER!!! ORDER PAYMENT DEADLINE FRIDAY 16TH NOVEMBER!!!! £90 A SET CHRISTMAS SPECIAL PRICE (USUALLY £100 A SET) It's time to run the 3rd batch order for the LED kick trims which have proven to be very popular so far Please read FULL post for details on price, colour options and also how to order and the order process in regards to the order cut off and when these will be manufactured. The LED kick trims are finished in stainless steel effect so they are very shiny and look much better than the old factory trims even when switched off. When switched on, the LED back lighting shines through the design on the plates and also around the edges. The trims come with a very strong 3m adhesive tape on the back so they are very quick and easy to fit in place, simply remove the old factory trims and then stick the new ones in place. These trims are also waterproof as well, so no worry about water getting in and damaging the LEDs. The set up for these kick trims is so that they turn on when you unlock the car or open a car door, by taking a feed from the courtesy light circuit. The trims come with the wiring kit; I will also be offering a fitting service in Essex for those who'd like me to fit them for you DESIGN OPTIONS: Within the attached photos, I have included design options I've come up with for the various MG Rover models on offer to give you an idea of what you could go for design wise. The manufacturer is fairly flexible when it comes to the design, so if anyone wishes to come up with their own design let me know and I can check with the manufacturer if it is doable. The design has to go on the bottom half of the trims, due to the arrangement of the LEDs under the trims. Personally I find simple is better, so I would personally advise not to go over complicated with the design or over do it as they look much better lit up when the design is more plain and simple like on the set I've had made for myself. COLOUR OPTIONS: These are the LED colour options available: - WHITE - BLUE - GREEN - RED - PURPLE - YELLOW - PINK PERMANENT ON VS SEQUENTIAL PATTERN LIGHTING: Now there are 2 set up options for the lighting, the LEDs can either be set up to just turn on and stay on, or the second option is the LEDs can be set up to run through a sequential pattern. To see what I mean about the sequential pattern option, see this video on youtube for a demonstration of the sequential kick trims fitted to my ZT: https://www.youtube.com/watch?v=Yj46iJ89yqw. The sequential pattern option is where the LEDS turn on, and then run through some patterns now and again such as the LEDs turning on from left to right along the kick trim and then from right to left, and also turning on and off in a soft glow pattern. PLEASE NOTE THE SEQUENTIAL PATTERN IS ONLY AVAILABLE IN BLUE, RED or WHITE. The permanent on option is available in BLUE, RED, WHITE, YELLOW, GREEN and PINK. PRICE: The price for these kits is £90 + £12.50 postage in the UK with the wiring kit and fitting instructions. For the various models you receive: - Rover 25/MG ZR 3 door model: 2 x long length LED kick trims - Rover 25/MG ZR 5 door model: 4 x LED kick trims - Rover 45/MG ZS: 4 x LED kick trims - Rover 75/MG ZT (saloons and tourers): 4 x LED kick trims - MGF/TF: 2 x large LED kick trims To secure your order, I will require a deposit of £90 (postage can be paid once the trims have been produced and are here) and I will need to know the following: 1. what car model you require the trims for 2. your choice of design option 3. your choice of LED colour 4. if you'd like the Permanent or Sequential LED option Once we have a total number of orders, they will be sent to the manufacturer as a complete order (payment for postage can be sorted later once the trims have arrived with me). Once I've placed the order with the manufacturer, depending on how many we order, the manufacturer process can take between 1-2 weeks, and once shipped will take around 1-2 weeks to arrive here with me, where I can then send them all on individually to everyone who's ordered them THE CUT OFF DEADLINE FOR ORDERING IS FRIDAY 16TH NOVEMBER AS THIS IS THE DATE I WILL SEND THE COMPLETE ORDER TO THE MANUFACTURER TO BE PRODUCED. I will be offering a fitting service for these trims for £30 in Thurrock, Essex. So if you'd like a set let me know with what design and what colour you'd like to go for, and whether you'd like the LEDs to stay on or if you'd like to go for the sequential pattern option (only available in White, Blue or Red). Remember I can do custom designs for you if you wish. Design options: Rover 75/MG ZT Rover 45/MG ZS Rover 25/MG ZR (3 door) Rover 25/MG ZR (5 door) MGF/TF __________________ How to retrofit Cruise Control on a diesel with no OEM wiring in place: Link How to retrofit heated electric memory seats with no OEM wiring in place: Link How to operate FBH and ATC via text Link How to restore cloudy projector headlights Link

16th November 2018, 10:03	#2
Rick-sta This is my second home MG ZT 2.0 CDTI+ in Typhoon, MG TF 135 in Typhoon & Rover 75 Connoisseur CDTI SE in Pearl Black Join Date: Oct 2012 Location: Norfolk Posts: 7,534 Thanks: 2,718 Thanked 2,827 Times in 1,462 Posts	Deadline today Reminder that the deadline for ordering the LED kick trims is today The next batch order most likely won't be until March next year __________________ How to retrofit Cruise Control on a diesel with no OEM wiring in place: Link How to retrofit heated electric memory seats with no OEM wiring in place: Link How to operate FBH and ATC via text Link How to restore cloudy projector headlights Link

9th December 2018, 21:22	#3
Proud owner Loves to post Rover 75 Saloon Join Date: Apr 2017 Location: Braintree Posts: 443 Thanks: 159 Thanked 126 Times in 100 Posts	Hi Rick, please add me to the list for some when you next order.